hgbook
view en/mq.tex @ 66:81a2f7a639ed
Fix typos
| author | Guy Brand <gb@isis.u-strasbg.fr> |
|---|---|
| date | Mon Aug 07 05:20:07 2006 -0700 (2006-08-07) |
| parents | 3f0176046fdc |
| children | 32bf9a5f22c0 |
line source
1 \chapter{Managing change with Mercurial Queues}
2 \label{chap:mq}
4 \section{The patch management problem}
5 \label{sec:mq:patch-mgmt}
7 Here is a common scenario: you need to install a software package from
8 source, but you find a bug that you must fix in the source before you
9 can start using the package. You make your changes, forget about the
10 package for a while, and a few months later you need to upgrade to a
11 newer version of the package. If the newer version of the package
12 still has the bug, you must extract your fix from the older source
13 tree and apply it against the newer version. This is a tedious task,
14 and it's easy to make mistakes.
16 This is a simple case of the ``patch management'' problem. You have
17 an ``upstream'' source tree that you can't change; you need to make
18 some local changes on top of the upstream tree; and you'd like to be
19 able to keep those changes separate, so that you can apply them to
20 newer versions of the upstream source.
22 The patch management problem arises in many situations. Probably the
23 most visible is that a user of an open source software project will
24 contribute a bug fix or new feature to the project's maintainers in the
25 form of a patch.
27 Distributors of operating systems that include open source software
28 often need to make changes to the packages they distribute so that
29 they will build properly in their environments.
31 When you have few changes to maintain, it is easy to manage a single
32 patch using the standard \texttt{diff} and \texttt{patch} programs
33 (see section~\ref{sec:mq:patch} for a discussion of these tools).
34 Once the number of changes grows, it starts to makes sense to maintain
35 patches as discrete ``chunks of work,'' so that for example a single
36 patch will contain only one bug fix (the patch might modify several
37 files, but it's doing ``only one thing''), and you may have a number
38 of such patches for different bugs you need fixed and local changes
39 you require. In this situation, if you submit a bug fix patch to the
40 upstream maintainers of a package and they include your fix in a
41 subsequent release, you can simply drop that single patch when you're
42 updating to the newer release.
44 Maintaining a single patch against an upstream tree is a little
45 tedious and error-prone, but not difficult. However, the complexity
46 of the problem grows rapidly as the number of patches you have to
47 maintain increases. With more than a tiny number of patches in hand,
48 understanding which ones you have applied and maintaining them moves
49 from messy to overwhelming.
51 Fortunately, Mercurial includes a powerful extension, Mercurial Queues
52 (or simply ``MQ''), that massively simplifies the patch management
53 problem.
55 \section{The prehistory of Mercurial Queues}
56 \label{sec:mq:history}
58 During the late 1990s, several Linux kernel developers started to
59 maintain ``patch series'' that modified the behaviour of the Linux
60 kernel. Some of these series were focused on stability, some on
61 feature coverage, and others were more speculative.
63 The sizes of these patch series grew rapidly. In 2002, Andrew Morton
64 published some shell scripts he had been using to automate the task of
65 managing his patch queues. Andrew was successfully using these
66 scripts to manage hundreds (sometimes thousands) of patches on top of
67 the Linux kernel.
69 \subsection{A patchwork quilt}
70 \label{sec:mq:quilt}
72 In early 2003, Andreas Gruenbacher and Martin Quinson borrowed the
73 approach of Andrew's scripts and published a tool called ``patchwork
74 quilt''~\cite{web:quilt}, or simply ``quilt''
75 (see~\cite{gruenbacher:2005} for a paper describing it). Because
76 quilt substantially automated patch management, it rapidly gained a
77 large following among open source software developers.
79 Quilt manages a \emph{stack of patches} on top of a directory tree.
80 To begin, you tell quilt to manage a directory tree, and tell it which
81 files you want to manage; it stores away the names and contents of
82 those files. To fix a bug, you create a new patch (using a single
83 command), edit the files you need to fix, then ``refresh'' the patch.
85 The refresh step causes quilt to scan the directory tree; it updates
86 the patch with all of the changes you have made. You can create
87 another patch on top of the first, which will track the changes
88 required to modify the tree from ``tree with one patch applied'' to
89 ``tree with two patches applied''.
91 You can \emph{change} which patches are applied to the tree. If you
92 ``pop'' a patch, the changes made by that patch will vanish from the
93 directory tree. Quilt remembers which patches you have popped,
94 though, so you can ``push'' a popped patch again, and the directory
95 tree will be restored to contain the modifications in the patch. Most
96 importantly, you can run the ``refresh'' command at any time, and the
97 topmost applied patch will be updated. This means that you can, at
98 any time, change both which patches are applied and what
99 modifications those patches make.
101 Quilt knows nothing about revision control tools, so it works equally
102 well on top of an unpacked tarball or a Subversion repository.
104 \subsection{From patchwork quilt to Mercurial Queues}
105 \label{sec:mq:quilt-mq}
107 In mid-2005, Chris Mason took the features of quilt and wrote an
108 extension that he called Mercurial Queues, which added quilt-like
109 behaviour to Mercurial.
111 The key difference between quilt and MQ is that quilt knows nothing
112 about revision control systems, while MQ is \emph{integrated} into
113 Mercurial. Each patch that you push is represented as a Mercurial
114 changeset. Pop a patch, and the changeset goes away.
116 Because quilt does not care about revision control tools, it is still
117 a tremendously useful piece of software to know about for situations
118 where you cannot use Mercurial and MQ.
120 \section{The huge advantage of MQ}
122 I cannot overstate the value that MQ offers through the unification of
123 patches and revision control.
125 A major reason that patches have persisted in the free software and
126 open source world---in spite of the availability of increasingly
127 capable revision control tools over the years---is the \emph{agility}
128 they offer.
130 Traditional revision control tools make a permanent, irreversible
131 record of everything that you do. While this has great value, it's
132 also somewhat stifling. If you want to perform a wild-eyed
133 experiment, you have to be careful in how you go about it, or you risk
134 leaving unneeded---or worse, misleading or destabilising---traces of
135 your missteps and errors in the permanent revision record.
137 By contrast, MQ's marriage of distributed revision control with
138 patches makes it much easier to isolate your work. Your patches live
139 on top of normal revision history, and you can make them disappear or
140 reappear at will. If you don't like a patch, you can drop it. If a
141 patch isn't quite as you want it to be, simply fix it---as many times
142 as you need to, until you have refined it into the form you desire.
144 As an example, the integration of patches with revision control makes
145 understanding patches and debugging their effects---and their
146 interplay with the code they're based on---\emph{enormously} easier.
147 Since every applied patch has an associated changeset, you can use
148 \hgcmdargs{log}{\emph{filename}} to see which changesets and patches
149 affected a file. You can use the \hgext{bisect} extension to
150 binary-search through all changesets and applied patches to see where
151 a bug got introduced or fixed. You can use the \hgcmd{annotate}
152 command to see which changeset or patch modified a particular line of
153 a source file. And so on.
155 \section{Understanding patches}
156 \label{sec:mq:patch}
158 Because MQ doesn't hide its patch-oriented nature, it is helpful to
159 understand what patches are, and a little about the tools that work
160 with them.
162 The traditional Unix \command{diff} command compares two files, and
163 prints a list of differences between them. The \command{patch} command
164 understands these differences as \emph{modifications} to make to a
165 file. Take a look at figure~\ref{ex:mq:diff} for a simple example of
166 these commands in action.
168 \begin{figure}[ht]
169 \interaction{mq.dodiff.diff}
170 \caption{Simple uses of the \command{diff} and \command{patch} commands}
171 \label{ex:mq:diff}
172 \end{figure}
174 The type of file that \command{diff} generates (and \command{patch}
175 takes as input) is called a ``patch'' or a ``diff''; there is no
176 difference between a patch and a diff. (We'll use the term ``patch'',
177 since it's more commonly used.)
179 A patch file can start with arbitrary text; the \command{patch}
180 command ignores this text, but MQ uses it as the commit message when
181 creating changesets. To find the beginning of the patch content,
182 \command{patch} searches for the first line that starts with the
183 string ``\texttt{diff~-}''.
185 MQ works with \emph{unified} diffs (\command{patch} can accept several
186 other diff formats, but MQ doesn't). A unified diff contains two
187 kinds of header. The \emph{file header} describes the file being
188 modified; it contains the name of the file to modify. When
189 \command{patch} sees a new file header, it looks for a file with that
190 name to start modifying.
192 After the file header comes a series of \emph{hunks}. Each hunk
193 starts with a header; this identifies the range of line numbers within
194 the file that the hunk should modify. Following the header, a hunk
195 starts and ends with a few (usually three) lines of text from the
196 unmodified file; these are called the \emph{context} for the hunk. If
197 there's only a small amount of context between successive hunks,
198 \command{diff} doesn't print a new hunk header; it just runs the hunks
199 together, with a few lines of context between modifications.
201 Each line of context begins with a space character. Within the hunk,
202 a line that begins with ``\texttt{-}'' means ``remove this line,''
203 while a line that begins with ``\texttt{+}'' means ``insert this
204 line.'' For example, a line that is modified is represented by one
205 deletion and one insertion.
207 We will return to some of the more subtle aspects of patches later (in
208 section~\ref{sec:mq:adv-patch}), but you should have enough information
209 now to use MQ.
211 \section{Getting started with Mercurial Queues}
212 \label{sec:mq:start}
214 Because MQ is implemented as an extension, you must explicitly enable
215 before you can use it. (You don't need to download anything; MQ ships
216 with the standard Mercurial distribution.) To enable MQ, edit your
217 \tildefile{.hgrc} file, and add the lines in figure~\ref{ex:mq:config}.
219 \begin{figure}[ht]
220 \begin{codesample4}
221 [extensions]
222 hgext.mq =
223 \end{codesample4}
224 \label{ex:mq:config}
225 \caption{Contents to add to \tildefile{.hgrc} to enable the MQ extension}
226 \end{figure}
228 Once the extension is enabled, it will make a number of new commands
229 available. To verify that the extension is working, you can use
230 \hgcmd{help} to see if the \hgcmd{qinit} command is now available; see
231 the example in figure~\ref{ex:mq:enabled}.
233 \begin{figure}[ht]
234 \interaction{mq.qinit-help.help}
235 \caption{How to verify that MQ is enabled}
236 \label{ex:mq:enabled}
237 \end{figure}
239 You can use MQ with \emph{any} Mercurial repository, and its commands
240 only operate within that repository. To get started, simply prepare
241 the repository using the \hgcmd{qinit} command (see
242 figure~\ref{ex:mq:qinit}). This command creates an empty directory
243 called \sdirname{.hg/patches}, where MQ will keep its metadata. As
244 with many Mercurial commands, the \hgcmd{qinit} command prints nothing
245 if it succeeds.
247 \begin{figure}[ht]
248 \interaction{mq.tutorial.qinit}
249 \caption{Preparing a repository for use with MQ}
250 \label{ex:mq:qinit}
251 \end{figure}
253 \begin{figure}[ht]
254 \interaction{mq.tutorial.qnew}
255 \caption{Creating a new patch}
256 \label{ex:mq:qnew}
257 \end{figure}
259 \subsection{Creating a new patch}
261 To begin work on a new patch, use the \hgcmd{qnew} command. This
262 command takes one argument, the name of the patch to create. MQ will
263 use this as the name of an actual file in the \sdirname{.hg/patches}
264 directory, as you can see in figure~\ref{ex:mq:qnew}.
266 Also newly present in the \sdirname{.hg/patches} directory are two
267 other files, \sfilename{series} and \sfilename{status}. The
268 \sfilename{series} file lists all of the patches that MQ knows about
269 for this repository, with one patch per line. Mercurial uses the
270 \sfilename{status} file for internal book-keeping; it tracks all of the
271 patches that MQ has \emph{applied} in this repository.
273 \begin{note}
274 You may sometimes want to edit the \sfilename{series} file by hand;
275 for example, to change the sequence in which some patches are
276 applied. However, manually editing the \sfilename{status} file is
277 almost always a bad idea, as it's easy to corrupt MQ's idea of what
278 is happening.
279 \end{note}
281 Once you have created your new patch, you can edit files in the
282 working directory as you usually would. All of the normal Mercurial
283 commands, such as \hgcmd{diff} and \hgcmd{annotate}, work exactly as
284 they did before.
286 \subsection{Refreshing a patch}
288 When you reach a point where you want to save your work, use the
289 \hgcmd{qrefresh} command (figure~\ref{ex:mq:qnew}) to update the patch
290 you are working on. This command folds the changes you have made in
291 the working directory into your patch, and updates its corresponding
292 changeset to contain those changes.
294 \begin{figure}[ht]
295 \interaction{mq.tutorial.qrefresh}
296 \caption{Refreshing a patch}
297 \label{ex:mq:qrefresh}
298 \end{figure}
300 You can run \hgcmd{qrefresh} as often as you like, so it's a good way
301 to ``checkpoint'' your work. Refresh your patch at an opportune
302 time; try an experiment; and if the experiment doesn't work out,
303 \hgcmd{revert} your modifications back to the last time you refreshed.
305 \begin{figure}[ht]
306 \interaction{mq.tutorial.qrefresh2}
307 \caption{Refresh a patch many times to accumulate changes}
308 \label{ex:mq:qrefresh2}
309 \end{figure}
311 \subsection{Stacking and tracking patches}
313 Once you have finished working on a patch, or need to work on another,
314 you can use the \hgcmd{qnew} command again to create a new patch.
315 Mercurial will apply this patch on top of your existing patch. See
316 figure~\ref{ex:mq:qnew2} for an example. Notice that the patch
317 contains the changes in our prior patch as part of its context (you
318 can see this more clearly in the output of \hgcmd{annotate}).
320 \begin{figure}[ht]
321 \interaction{mq.tutorial.qnew2}
322 \caption{Stacking a second patch on top of the first}
323 \label{ex:mq:qnew2}
324 \end{figure}
326 So far, with the exception of \hgcmd{qnew} and \hgcmd{qrefresh}, we've
327 been careful to only use regular Mercurial commands. However, MQ
328 provides many commands that are easier to use when you are thinking
329 about patches, as illustrated in figure~\ref{ex:mq:qseries}:
331 \begin{itemize}
332 \item The \hgcmd{qseries} command lists every patch that MQ knows
333 about in this repository, from oldest to newest (most recently
334 \emph{created}).
335 \item The \hgcmd{qapplied} command lists every patch that MQ has
336 \emph{applied} in this repository, again from oldest to newest (most
337 recently applied).
338 \end{itemize}
340 \begin{figure}[ht]
341 \interaction{mq.tutorial.qseries}
342 \caption{Understanding the patch stack with \hgcmd{qseries} and
343 \hgcmd{qapplied}}
344 \label{ex:mq:qseries}
345 \end{figure}
347 \subsection{Manipulating the patch stack}
349 The previous discussion implied that there must be a difference
350 between ``known'' and ``applied'' patches, and there is. MQ can
351 manage a patch without it being applied in the repository.
353 An \emph{applied} patch has a corresponding changeset in the
354 repository, and the effects of the patch and changeset are visible in
355 the working directory. You can undo the application of a patch using
356 the \hgcmd{qpop} command. MQ still \emph{knows about}, or manages, a
357 popped patch, but the patch no longer has a corresponding changeset in
358 the repository, and the working directory does not contain the changes
359 made by the patch. Figure~\ref{fig:mq:stack} illustrates the
360 difference between applied and tracked patches.
362 \begin{figure}[ht]
363 \centering
364 \grafix{mq-stack}
365 \caption{Applied and unapplied patches in the MQ patch stack}
366 \label{fig:mq:stack}
367 \end{figure}
369 You can reapply an unapplied, or popped, patch using the \hgcmd{qpush}
370 command. This creates a new changeset to correspond to the patch, and
371 the patch's changes once again become present in the working
372 directory. See figure~\ref{ex:mq:qpop} for examples of \hgcmd{qpop}
373 and \hgcmd{qpush} in action. Notice that once we have popped a patch
374 or two patches, the output of \hgcmd{qseries} remains the same, while
375 that of \hgcmd{qapplied} has changed.
377 \begin{figure}[ht]
378 \interaction{mq.tutorial.qpop}
379 \caption{Modifying the stack of applied patches}
380 \label{ex:mq:qpop}
381 \end{figure}
383 \subsection{Pushing and popping many patches}
385 While \hgcmd{qpush} and \hgcmd{qpop} each operate on a single patch at
386 a time by default, you can push and pop many patches in one go. The
387 \hgopt{qpush}{-a} option to \hgcmd{qpush} causes it to push all
388 unapplied patches, while the \hgopt{qpop}{-a} option to \hgcmd{qpop}
389 causes it to pop all applied patches. (For some more ways to push and
390 pop many patches, see section~\ref{sec:mq:perf} below.)
392 \begin{figure}[ht]
393 \interaction{mq.tutorial.qpush-a}
394 \caption{Pushing all unapplied patches}
395 \label{ex:mq:qpush-a}
396 \end{figure}
398 \subsection{Safety checks, and overriding them}
400 Several MQ commands check the working directory before they do
401 anything, and fail if they find any modifications. They do this to
402 ensure that you won't lose any changes that you have made, but not yet
403 incorporated into a patch. Figure~\ref{ex:mq:add} illustrates this;
404 the \hgcmd{qnew} command will not create a new patch if there are
405 outstanding changes, caused in this case by the \hgcmd{add} of
406 \filename{file3}.
408 \begin{figure}[ht]
409 \interaction{mq.tutorial.add}
410 \caption{Forcibly creating a patch}
411 \label{ex:mq:add}
412 \end{figure}
414 Commands that check the working directory all take an ``I know what
415 I'm doing'' option, which is always named \option{-f}. The exact
416 meaning of \option{-f} depends on the command. For example,
417 \hgcmdargs{qnew}{\hgopt{qnew}{-f}} will incorporate any outstanding
418 changes into the new patch it creates, but
419 \hgcmdargs{qpop}{\hgopt{qpop}{-f}} will revert modifications to any
420 files affected by the patch that it is popping. Be sure to read the
421 documentation for a command's \option{-f} option before you use it!
423 \subsection{Working on several patches at once}
425 The \hgcmd{qrefresh} command always refreshes the \emph{topmost}
426 applied patch. This means that you can suspend work on one patch (by
427 refreshing it), pop or push to make a different patch the top, and
428 work on \emph{that} patch for a while.
430 Here's an example that illustrates how you can use this ability.
431 Let's say you're developing a new feature as two patches. The first
432 is a change to the core of your software, and the second---layered on
433 top of the first---changes the user interface to use the code you just
434 added to the core. If you notice a bug in the core while you're
435 working on the UI patch, it's easy to fix the core. Simply
436 \hgcmd{qrefresh} the UI patch to save your in-progress changes, and
437 \hgcmd{qpop} down to the core patch. Fix the core bug,
438 \hgcmd{qrefresh} the core patch, and \hgcmd{qpush} back to the UI
439 patch to continue where you left off.
441 \section{More about patches}
442 \label{sec:mq:adv-patch}
444 MQ uses the GNU \command{patch} command to apply patches, so it's
445 helpful to know a few more detailed aspects of how \command{patch}
446 works, and about patches themselves.
448 \subsection{The strip count}
450 If you look at the file headers in a patch, you will notice that the
451 pathnames usually have an extra component on the front that isn't
452 present in the actual path name. This is a holdover from the way that
453 people used to generate patches (people still do this, but it's
454 somewhat rare with modern revision control tools).
456 Alice would unpack a tarball, edit her files, then decide that she
457 wanted to create a patch. So she'd rename her working directory,
458 unpack the tarball again (hence the need for the rename), and use the
459 \cmdopt{diff}{-r} and \cmdopt{diff}{-N} options to \command{diff} to
460 recursively generate a patch between the unmodified directory and the
461 modified one. The result would be that the name of the unmodified
462 directory would be at the front of the left-hand path in every file
463 header, and the name of the modified directory would be at the front
464 of the right-hand path.
466 Since someone receiving a patch from the Alices of the net would be
467 unlikely to have unmodified and modified directories with exactly the
468 same names, the \command{patch} command has a \cmdopt{patch}{-p}
469 option that indicates the number of leading path name components to
470 strip when trying to apply a patch. This number is called the
471 \emph{strip count}.
473 An option of ``\texttt{-p1}'' means ``use a strip count of one''. If
474 \command{patch} sees a file name \filename{foo/bar/baz} in a file
475 header, it will strip \filename{foo} and try to patch a file named
476 \filename{bar/baz}. (Strictly speaking, the strip count refers to the
477 number of \emph{path separators} (and the components that go with them
478 ) to strip. A strip count of one will turn \filename{foo/bar} into
479 \filename{bar}, but \filename{/foo/bar} (notice the extra leading
480 slash) into \filename{foo/bar}.)
482 The ``standard'' strip count for patches is one; almost all patches
483 contain one leading path name component that needs to be stripped.
484 Mercurial's \hgcmd{diff} command generates path names in this form,
485 and the \hgcmd{import} command and MQ expect patches to have a strip
486 count of one.
488 If you receive a patch from someone that you want to add to your patch
489 queue, and the patch needs a strip count other than one, you cannot
490 just \hgcmd{qimport} the patch, because \hgcmd{qimport} does not yet
491 have a \texttt{-p} option (see~\bug{311}). Your best bet is to
492 \hgcmd{qnew} a patch of your own, then use \cmdargs{patch}{-p\emph{N}}
493 to apply their patch, followed by \hgcmd{addremove} to pick up any
494 files added or removed by the patch, followed by \hgcmd{qrefresh}.
495 This complexity may become unnecessary; see~\bug{311} for details.
496 \subsection{Strategies for applying a patch}
498 When \command{patch} applies a hunk, it tries a handful of
499 successively less accurate strategies to try to make the hunk apply.
500 This falling-back technique often makes it possible to take a patch
501 that was generated against an old version of a file, and apply it
502 against a newer version of that file.
504 First, \command{patch} tries an exact match, where the line numbers,
505 the context, and the text to be modified must apply exactly. If it
506 cannot make an exact match, it tries to find an exact match for the
507 context, without honouring the line numbering information. If this
508 succeeds, it prints a line of output saying that the hunk was applied,
509 but at some \emph{offset} from the original line number.
511 If a context-only match fails, \command{patch} removes the first and
512 last lines of the context, and tries a \emph{reduced} context-only
513 match. If the hunk with reduced context succeeds, it prints a message
514 saying that it applied the hunk with a \emph{fuzz factor} (the number
515 after the fuzz factor indicates how many lines of context
516 \command{patch} had to trim before the patch applied).
518 When neither of these techniques works, \command{patch} prints a
519 message saying that the hunk in question was rejected. It saves
520 rejected hunks (also simply called ``rejects'') to a file with the
521 same name, and an added \sfilename{.rej} extension. It also saves an
522 unmodified copy of the file with a \sfilename{.orig} extension; the
523 copy of the file without any extensions will contain any changes made
524 by hunks that \emph{did} apply cleanly. If you have a patch that
525 modifies \filename{foo} with six hunks, and one of them fails to
526 apply, you will have: an unmodified \filename{foo.orig}, a
527 \filename{foo.rej} containing one hunk, and \filename{foo}, containing
528 the changes made by the five successful five hunks.
530 \subsection{Some quirks of patch representation}
532 There are a few useful things to know about how \command{patch} works
533 with files.
534 \begin{itemize}
535 \item This should already be obvious, but \command{patch} cannot
536 handle binary files.
537 \item Neither does it care about the executable bit; it creates new
538 files as readable, but not executable.
539 \item \command{patch} treats the removal of a file as a diff between
540 the file to be removed and the empty file. So your idea of ``I
541 deleted this file'' looks like ``every line of this file was
542 deleted'' in a patch.
543 \item It treats the addition of a file as a diff between the empty
544 file and the file to be added. So in a patch, your idea of ``I
545 added this file'' looks like ``every line of this file was added''.
546 \item It treats a renamed file as the removal of the old name, and the
547 addition of the new name. This means that renamed files have a big
548 footprint in patches. (Note also that Mercurial does not currently
549 try to infer when files have been renamed or copied in a patch.)
550 \item \command{patch} cannot represent empty files, so you cannot use
551 a patch to represent the notion ``I added this empty file to the
552 tree''.
553 \end{itemize}
554 \subsection{Beware the fuzz}
556 While applying a hunk at an offset, or with a fuzz factor, will often
557 be completely successful, these inexact techniques naturally leave
558 open the possibility of corrupting the patched file. The most common
559 cases typically involve applying a patch twice, or at an incorrect
560 location in the file. If \command{patch} or \hgcmd{qpush} ever
561 mentions an offset or fuzz factor, you should make sure that the
562 modified files are correct afterwards.
564 It's often a good idea to refresh a patch that has applied with an
565 offset or fuzz factor; refreshing the patch generates new context
566 information that will make it apply cleanly. I say ``often,'' not
567 ``always,'' because sometimes refreshing a patch will make it fail to
568 apply against a different revision of the underlying files. In some
569 cases, such as when you're maintaining a patch that must sit on top of
570 multiple versions of a source tree, it's acceptable to have a patch
571 apply with some fuzz, provided you've verified the results of the
572 patching process in such cases.
574 \subsection{Handling rejection}
576 If \hgcmd{qpush} fails to apply a patch, it will print an error
577 message and exit. If it has left \sfilename{.rej} files behind, it is
578 usually best to fix up the rejected hunks before you push more patches
579 or do any further work.
581 If your patch \emph{used to} apply cleanly, and no longer does because
582 you've changed the underlying code that your patches are based on,
583 Mercurial Queues can help; see section~\ref{sec:mq:merge} for details.
585 Unfortunately, there aren't any great techniques for dealing with
586 rejected hunks. Most often, you'll need to view the \sfilename{.rej}
587 file and edit the target file, applying the rejected hunks by hand.
589 If you're feeling adventurous, Neil Brown, a Linux kernel hacker,
590 wrote a tool called \command{wiggle}~\cite{web:wiggle}, which is more
591 vigorous than \command{patch} in its attempts to make a patch apply.
593 Another Linux kernel hacker, Chris Mason (the author of Mercurial
594 Queues), wrote a similar tool called \command{rej}~\cite{web:rej},
595 which takes a simple approach to automating the application of hunks
596 rejected by \command{patch}. \command{rej} can help with four common
597 reasons that a hunk may be rejected:
599 \begin{itemize}
600 \item The context in the middle of a hunk has changed.
601 \item A hunk is missing some context at the beginning or end.
602 \item A large hunk might apply better---either entirely or in
603 part---if it was broken up into smaller hunks.
604 \item A hunk removes lines with slightly different content than those
605 currently present in the file.
606 \end{itemize}
608 If you use \command{wiggle} or \command{rej}, you should be doubly
609 careful to check your results when you're done. In fact,
610 \command{rej} enforces this method of double-checking the tool's
611 output, by automatically dropping you into a merge program when it has
612 done its job, so that you can verify its work and finish off any
613 remaining merges.
615 \section{Getting the best performance out of MQ}
616 \label{sec:mq:perf}
618 MQ is very efficient at handling a large number of patches. I ran
619 some performance experiments in mid-2006 for a talk that I gave at the
620 2006 EuroPython conference~\cite{web:europython}. I used as my data
621 set the Linux 2.6.17-mm1 patch series, which consists of 1,738
622 patches. I applied these on top of a Linux kernel repository
623 containing all 27,472 revisions between Linux 2.6.12-rc2 and Linux
624 2.6.17.
626 On my old, slow laptop, I was able to
627 \hgcmdargs{qpush}{\hgopt{qpush}{-a}} all 1,738 patches in 3.5 minutes,
628 and \hgcmdargs{qpop}{\hgopt{qpop}{-a}} them all in 30 seconds. (On a
629 newer laptop, the time to push all patches dropped to two minutes.) I
630 could \hgcmd{qrefresh} one of the biggest patches (which made 22,779
631 lines of changes to 287 files) in 6.6 seconds.
633 Clearly, MQ is well suited to working in large trees, but there are a
634 few tricks you can use to get the best performance of it.
636 First of all, try to ``batch'' operations together. Every time you
637 run \hgcmd{qpush} or \hgcmd{qpop}, these commands scan the working
638 directory once to make sure you haven't made some changes and then
639 forgotten to run \hgcmd{qrefresh}. On a small tree, the time that
640 this scan takes is unnoticeable. However, on a medium-sized tree
641 (containing tens of thousands of files), it can take a second or more.
643 The \hgcmd{qpush} and \hgcmd{qpop} commands allow you to push and pop
644 multiple patches at a time. You can identify the ``destination
645 patch'' that you want to end up at. When you \hgcmd{qpush} with a
646 destination specified, it will push patches until that patch is at the
647 top of the applied stack. When you \hgcmd{qpop} to a destination, MQ
648 will pop patches until the destination patch is at the top.
650 You can identify a destination patch using either the name of the
651 patch, or by number. If you use numeric addressing, patches are
652 counted from zero; this means that the first patch is zero, the second
653 is one, and so on.
655 \section{Updating your patches when the underlying code changes}
656 \label{sec:mq:merge}
658 It's common to have a stack of patches on top of an underlying
659 repository that you don't modify directly. If you're working on
660 changes to third-party code, or on a feature that is taking longer to
661 develop than the rate of change of the code beneath, you will often
662 need to sync up with the underlying code, and fix up any hunks in your
663 patches that no longer apply. This is called \emph{rebasing} your
664 patch series.
666 The simplest way to do this is to \hgcmdargs{qpop}{\hgopt{qpop}{-a}}
667 your patches, then \hgcmd{pull} changes into the underlying
668 repository, and finally \hgcmdargs{qpush}{\hgopt{qpop}{-a}} your
669 patches again. MQ will stop pushing any time it runs across a patch
670 that fails to apply during conflicts, allowing you to fix your
671 conflicts, \hgcmd{qrefresh} the affected patch, and continue pushing
672 until you have fixed your entire stack.
674 This approach is easy to use and works well if you don't expect
675 changes to the underlying code to affect how well your patches apply.
676 If your patch stack touches code that is modified frequently or
677 invasively in the underlying repository, however, fixing up rejected
678 hunks by hand quickly becomes tiresome.
680 It's possible to partially automate the rebasing process. If your
681 patches apply cleanly against some revision of the underlying repo, MQ
682 can use this information to help you to resolve conflicts between your
683 patches and a different revision.
685 The process is a little involved.
686 \begin{enumerate}
687 \item To begin, \hgcmdargs{qpush}{-a} all of your patches on top of
688 the revision where you know that they apply cleanly.
689 \item Save a backup copy of your patch directory using
690 \hgcmdargs{qsave}{\hgopt{qsave}{-e} \hgopt{qsave}{-c}}. This prints
691 the name of the directory that it has saved the patches in. It will
692 save the patches to a directory called
693 \sdirname{.hg/patches.\emph{N}}, where \texttt{\emph{N}} is a small
694 integer. It also commits a ``save changeset'' on top of your
695 applied patches; this is for internal book-keeping, and records the
696 states of the \sfilename{series} and \sfilename{status} files.
697 \item Use \hgcmd{pull} to bring new changes into the underlying
698 repository. (Don't run \hgcmdargs{pull}{-u}; see below for why.)
699 \item Update to the new tip revision, using
700 \hgcmdargs{update}{\hgopt{update}{-C}} to override the patches you
701 have pushed.
702 \item Merge all patches using \hgcmdargs{qpush}{\hgopt{qpush}{-m}
703 \hgopt{qpush}{-a}}. The \hgopt{qpush}{-m} option to \hgcmd{qpush}
704 tells MQ to perform a three-way merge if the patch fails to apply.
705 \end{enumerate}
707 During the \hgcmdargs{qpush}{\hgopt{qpush}{-m}}, each patch in the
708 \sfilename{series} file is applied normally. If a patch applies with
709 fuzz or rejects, MQ looks at the queue you \hgcmd{qsave}d, and
710 performs a three-way merge with the corresponding changeset. This
711 merge uses Mercurial's normal merge machinery, so it may pop up a GUI
712 merge tool to help you to resolve problems.
714 When you finish resolving the effects of a patch, MQ refreshes your
715 patch based on the result of the merge.
717 At the end of this process, your repository will have one extra head
718 from the old patch queue, and a copy of the old patch queue will be in
719 \sdirname{.hg/patches.\emph{N}}. You can remove the extra head using
720 \hgcmdargs{qpop}{\hgopt{qpop}{-a} \hgopt{qpop}{-n} patches.\emph{N}}
721 or \hgcmd{strip}. You can delete \sdirname{.hg/patches.\emph{N}} once
722 you are sure that you no longer need it as a backup.
724 \section{Identifying patches}
726 MQ commands that work with patches let you refer to a patch either by
727 using its name or by a number. By name is obvious enough; pass the
728 name \filename{foo.patch} to \hgcmd{qpush}, for example, and it will
729 push patches until \filename{foo.patch} is applied.
731 As a shortcut, you can refer to a patch using both a name and a
732 numeric offset; \texttt{foo.patch-2} means ``two patches before
733 \texttt{foo.patch}'', while \texttt{bar.patch+4} means ``four patches
734 after \texttt{bar.patch}''.
736 Referring to a patch by index isn't much different. The first patch
737 printed in the output of \hgcmd{qseries} is patch zero (yes, it's one
738 of those start-at-zero counting systems); the second is patch one; and
739 so on
741 MQ also makes it easy to work with patches when you are using normal
742 Mercurial commands. Every command that accepts a changeset ID will
743 also accept the name of an applied patch. MQ augments the tags
744 normally in the repository with an eponymous one for each applied
745 patch. In addition, the special tags \index{tags!special tag
746 names!\texttt{qbase}}\texttt{qbase} and \index{tags!special tag
747 names!\texttt{qtip}}\texttt{qtip} identify the ``bottom-most'' and
748 topmost applied patches, respectively.
750 These additions to Mercurial's normal tagging capabilities make
751 dealing with patches even more of a breeze.
752 \begin{itemize}
753 \item Want to patchbomb a mailing list with your latest series of
754 changes?
755 \begin{codesample4}
756 hg email qbase:qtip
757 \end{codesample4}
758 \item Need to see all of the patches since \texttt{foo.patch} that
759 have touched files in a subdirectory of your tree?
760 \begin{codesample4}
761 hg log -r foo.patch:qtip \emph{subdir}
762 \end{codesample4}
763 \end{itemize}
765 Because MQ makes the names of patches available to the rest of
766 Mercurial through its normal internal tag machinery, you don't need to
767 type in the entire name of a patch when you want to identify it by
768 name.
770 \begin{figure}[ht]
771 \interaction{mq.id.out}
772 \caption{Using MQ's tag features to work with patches}
773 \label{ex:mq:id}
774 \end{figure}
776 Another nice consequence of representing patch names as tags is that
777 when you run the \hgcmd{log} command, it will display a patch's name
778 as a tag, simply as part of its normal output. This makes it easy to
779 visually distinguish applied patches from underlying ``normal''
780 revisions. Figure~\ref{ex:mq:id} shows a few normal Mercurial
781 commands in use with applied patches.
783 \section{Useful things to know about}
785 There are a number of aspects of MQ usage that don't fit tidily into
786 sections of their own, but that are good to know. Here they are, in
787 one place.
789 \begin{itemize}
790 \item Normally, when you \hgcmd{qpop} a patch and \hgcmd{qpush} it
791 again, the changeset that represents the patch after the pop/push
792 will have a \emph{different identity} than the changeset that
793 represented the hash beforehand. See section~\ref{sec:mq:cmd:qpush}
794 for information as to why this is.
795 \item It's not a good idea to \hgcmd{merge} changes from another
796 branch with a patch changeset, at least if you want to maintain the
797 ``patchiness'' of that changeset and changesets below it on the
798 patch stack. If you try to do this, it will appear to succeed, but
799 MQ will become confused.
800 \end{itemize}
802 \section{Managing patches in a repository}
804 Because MQ's \sdirname{.hg/patches} directory resides outside a
805 Mercurial repository's working directory, the ``underlying'' Mercurial
806 repository knows nothing about the management or presence of patches.
808 This presents the interesting possibility of managing the contents of
809 the patch directory as a Mercurial repository in its own right. This
810 can be a useful way to work. For example, you can work on a patch for
811 a while, \hgcmd{qrefresh} it, then \hgcmd{commit} the current state of
812 the patch. This lets you ``roll back'' to that version of the patch
813 later on.
815 You can then share different versions of the same patch stack among
816 multiple underlying repositories. I use this when I am developing a
817 Linux kernel feature. I have a pristine copy of my kernel sources for
818 each of several CPU architectures, and a cloned repository under each
819 that contains the patches I am working on. When I want to test a
820 change on a different architecture, I push my current patches to the
821 patch repository associated with that kernel tree, pop and push all of
822 my patches, and build and test that kernel.
824 Managing patches in a repository makes it possible for multiple
825 developers to work on the same patch series without colliding with
826 each other, all on top of an underlying source base that they may or
827 may not control.
829 \subsection{MQ support for patch repositories}
831 MQ helps you to work with the \sdirname{.hg/patches} directory as a
832 repository; when you prepare a repository for working with patches
833 using \hgcmd{qinit}, you can pass the \hgopt{qinit}{-c} option to
834 create the \sdirname{.hg/patches} directory as a Mercurial repository.
836 \begin{note}
837 If you forget to use the \hgopt{qinit}{-c} option, you can simply go
838 into the \sdirname{.hg/patches} directory at any time and run
839 \hgcmd{init}. Don't forget to add an entry for the
840 \sfilename{status} file to the \sfilename{.hgignore} file, though
841 (\hgcmdargs{qinit}{\hgopt{qinit}{-c}} does this for you
842 automatically); you \emph{really} don't want to manage the
843 \sfilename{status} file.
844 \end{note}
846 As a convenience, if MQ notices that the \dirname{.hg/patches}
847 directory is a repository, it will automatically \hgcmd{add} every
848 patch that you create and import.
850 Finally, MQ provides a shortcut command, \hgcmd{qcommit}, that runs
851 \hgcmd{commit} in the \sdirname{.hg/patches} directory. This saves
852 some cumbersome typing.
854 \subsection{A few things to watch out for}
856 MQ's support for working with a repository full of patches is limited
857 in a few small respects.
859 MQ cannot automatically detect changes that you make to the patch
860 directory. If you \hgcmd{pull}, manually edit, or \hgcmd{update}
861 changes to patches or the \sfilename{series} file, you will have to
862 \hgcmdargs{qpop}{\hgopt{qpop}{-a}} and then
863 \hgcmdargs{qpush}{\hgopt{qpush}{-a}} in the underlying repository to
864 see those changes show up there. If you forget to do this, you can
865 confuse MQ's idea of which patches are applied.
867 \section{Third party tools for working with patches}
868 \label{sec:mq:tools}
870 Once you've been working with patches for a while, you'll find
871 yourself hungry for tools that will help you to understand and
872 manipulate the patches you're dealing with.
874 The \command{diffstat} command~\cite{web:diffstat} generates a
875 histogram of the modifications made to each file in a patch. It
876 provides a good way to ``get a sense of'' a patch---which files it
877 affects, and how much change it introduces to each file and as a
878 whole. (I find that it's a good idea to use \command{diffstat}'s
879 \texttt{-p} option as a matter of course, as otherwise it will try to
880 do clever things with prefixes of file names that inevitably confuse
881 at least me.)
883 \begin{figure}[ht]
884 \interaction{mq.tools.tools}
885 \caption{The \command{diffstat}, \command{filterdiff}, and \command{lsdiff} commands}
886 \label{ex:mq:tools}
887 \end{figure}
889 The \package{patchutils} package~\cite{web:patchutils} is invaluable.
890 It provides a set of small utilities that follow the ``Unix
891 philosophy;'' each does one useful thing with a patch. The
892 \package{patchutils} command I use most is \command{filterdiff}, which
893 extracts subsets from a patch file. For example, given a patch that
894 modifies hundreds of files across dozens of directories, a single
895 invocation of \command{filterdiff} can generate a smaller patch that
896 only touches files whose names match a particular glob pattern.
898 \section{Good ways to work with patches}
900 Whether you are working on a patch series to submit to a free software
901 or open source project, or a series that you intend to treat as a
902 sequence of regular changesets when you're done, you can use some
903 simple techniques to keep your work well organised.
905 Give your patches descriptive names. A good name for a patch might be
906 \filename{rework-device-alloc.patch}, because it will immediately give
907 you a hint what the purpose of the patch is. Long names shouldn't be
908 a problem; you won't be typing the names often, but you \emph{will} be
909 running commands like \hgcmd{qapplied} and \hgcmd{qtop} over and over.
910 Good naming becomes especially important when you have a number of
911 patches to work with, or if you are juggling a number of different
912 tasks and your patches only get a fraction of your attention.
914 Be aware of what patch you're working on. Use the \hgcmd{qtop}
915 command and skim over the text of your patches frequently---for
916 example, using \hgcmdargs{tip}{\hgopt{tip}{-p}})---to be sure of where
917 you stand. I have several times worked on and \hgcmd{qrefresh}ed a
918 patch other than the one I intended, and it's often tricky to migrate
919 changes into the right patch after making them in the wrong one.
921 For this reason, it is very much worth investing a little time to
922 learn how to use some of the third-party tools I described in
923 section~\ref{sec:mq:tools}, particularly \command{diffstat} and
924 \command{filterdiff}. The former will give you a quick idea of what
925 changes your patch is making, while the latter makes it easy to splice
926 hunks selectively out of one patch and into another.
928 \section{MQ cookbook}
930 \subsection{Manage ``trivial'' patches}
932 Because the overhead of dropping files into a new Mercurial repository
933 is so low, it makes a lot of sense to manage patches this way even if
934 you simply want to make a few changes to a source tarball that you
935 downloaded.
937 Begin by downloading and unpacking the source tarball,
938 and turning it into a Mercurial repository.
939 \interaction{mq.tarball.download}
941 Continue by creating a patch stack and making your changes.
942 \interaction{mq.tarball.qinit}
944 Let's say a few weeks or months pass, and your package author releases
945 a new version. First, bring their changes into the repository.
946 \interaction{mq.tarball.newsource}
947 The pipeline starting with \hgcmd{locate} above deletes all files in
948 the working directory, so that \hgcmd{commit}'s
949 \hgopt{commit}{--addremove} option can actually tell which files have
950 really been removed in the newer version of the source.
952 Finally, you can apply your patches on top of the new tree.
953 \interaction{mq.tarball.repush}
955 \subsection{Combining entire patches}
956 \label{sec:mq:combine}
958 MQ provides a command, \hgcmd{qfold} that lets you combine entire
959 patches. This ``folds'' the patches you name, in the order you name
960 them, into the topmost applied patch, and concatenates their
961 descriptions onto the end of its description. The patches that you
962 fold must be unapplied before you fold them.
964 The order in which you fold patches matters. If your topmost applied
965 patch is \texttt{foo}, and you \hgcmd{qfold} \texttt{bar} and
966 \texttt{quux} into it, you will end up with a patch that has the same
967 effect as if you applied first \texttt{foo}, then \texttt{bar},
968 followed by \texttt{quux}.
970 \subsection{Merging part of one patch into another}
972 Merging \emph{part} of one patch into another is more difficult than
973 combining entire patches.
975 If you want to move changes to entire files, you can use
976 \command{filterdiff}'s \cmdopt{filterdiff}{-i} and
977 \cmdopt{filterdiff}{-x} options to choose the modifications to snip
978 out of one patch, concatenating its output onto the end of the patch
979 you want to merge into. You usually won't need to modify the patch
980 you've merged the changes from. Instead, MQ will report some rejected
981 hunks when you \hgcmd{qpush} it (from the hunks you moved into the
982 other patch), and you can simply \hgcmd{qrefresh} the patch to drop
983 the duplicate hunks.
985 If you have a patch that has multiple hunks modifying a file, and you
986 only want to move a few of those hunks, the job becomes more messy,
987 but you can still partly automate it. Use \cmdargs{lsdiff}{-nvv} to
988 print some metadata about the patch.
989 \interaction{mq.tools.lsdiff}
991 This command prints three different kinds of number:
992 \begin{itemize}
993 \item (in the first column) a \emph{file number} to identify each file
994 modified in the patch;
995 \item (on the next line, indented) the line number within a modified
996 file where a hunk starts; and
997 \item (on the same line) a \emph{hunk number} to identify that hunk.
998 \end{itemize}
1000 You'll have to use some visual inspection, and reading of the patch,
1001 to identify the file and hunk numbers you'll want, but you can then
1002 pass them to to \command{filterdiff}'s \cmdopt{filterdiff}{--files}
1003 and \cmdopt{filterdiff}{--hunks} options, to select exactly the file
1004 and hunk you want to extract.
1006 Once you have this hunk, you can concatenate it onto the end of your
1007 destination patch and continue with the remainder of
1008 section~\ref{sec:mq:combine}.
1010 \section{Differences between quilt and MQ}
1012 If you are already familiar with quilt, MQ provides a similar command
1013 set. There are a few differences in the way that it works.
1015 You will already have noticed that most quilt commands have MQ
1016 counterparts that simply begin with a ``\texttt{q}''. The exceptions
1017 are quilt's \texttt{add} and \texttt{remove} commands, the
1018 counterparts for which are the normal Mercurial \hgcmd{add} and
1019 \hgcmd{remove} commands. There is no MQ equivalent of the quilt
1020 \texttt{edit} command.
1022 \section{MQ command reference}
1023 \label{sec:mq:cmdref}
1025 For an overview of the commands provided by MQ, use the command
1026 \hgcmdargs{help}{mq}.
1028 \subsection{\hgcmd{qapplied}---print applied patches}
1030 The \hgcmd{qapplied} command prints the current stack of applied
1031 patches. Patches are printed in oldest-to-newest order, so the last
1032 patch in the list is the ``top'' patch.
1034 \subsection{\hgcmd{qcommit}---commit changes in the queue repository}
1036 The \hgcmd{qcommit} command commits any outstanding changes in the
1037 \sdirname{.hg/patches} repository. This command only works if the
1038 \sdirname{.hg/patches} directory is a repository, i.e.~you created the
1039 directory using \hgcmdargs{qinit}{\hgopt{qinit}{-c}} or ran
1040 \hgcmd{init} in the directory after running \hgcmd{qinit}.
1042 This command is shorthand for \hgcmdargs{commit}{--cwd .hg/patches}.
1044 \subsection{\hgcmd{qdelete}---delete a patch from the
1045 \sfilename{series} file}
1047 The \hgcmd{qdelete} command removes the entry for a patch from the
1048 \sfilename{series} file in the \sdirname{.hg/patches} directory. It
1049 does not pop the patch if the patch is already applied. By default,
1050 it does not delete the patch file; use the \hgopt{qdel}{-f} option to
1051 do that.
1053 Options:
1054 \begin{itemize}
1055 \item[\hgopt{qdel}{-f}] Delete the patch file.
1056 \end{itemize}
1058 \subsection{\hgcmd{qdiff}---print a diff of the topmost applied patch}
1060 The \hgcmd{qdiff} command prints a diff of the topmost applied patch.
1061 It is equivalent to \hgcmdargs{diff}{-r-2:-1}.
1063 \subsection{\hgcmd{qfold}---merge (``fold'') several patches into one}
1065 The \hgcmd{qfold} command merges multiple patches into the topmost
1066 applied patch, so that the topmost applied patch makes the union of
1067 all of the changes in the patches in question.
1069 The patches to fold must not be applied; \hgcmd{qfold} will exit with
1070 an error if any is. The order in which patches are folded is
1071 significant; \hgcmdargs{qfold}{a b} means ``apply the current topmost
1072 patch, followed by \texttt{a}, followed by \texttt{b}''.
1074 The comments from the folded patches are appended to the comments of
1075 the destination patch, with each block of comments separated by three
1076 asterisk (``\texttt{*}'') characters. Use the \hgopt{qfold}{-e}
1077 option to edit the commit message for the combined patch/changeset
1078 after the folding has completed.
1080 Options:
1081 \begin{itemize}
1082 \item[\hgopt{qfold}{-e}] Edit the commit message and patch description
1083 for the newly folded patch.
1084 \item[\hgopt{qfold}{-l}] Use the contents of the given file as the new
1085 commit message and patch description for the folded patch.
1086 \item[\hgopt{qfold}{-m}] Use the given text as the new commit message
1087 and patch description for the folded patch.
1088 \end{itemize}
1090 \subsection{\hgcmd{qheader}---display the header/description of a patch}
1092 The \hgcmd{qheader} command prints the header, or description, of a
1093 patch. By default, it prints the header of the topmost applied patch.
1094 Given an argument, it prints the header of the named patch.
1096 \subsection{\hgcmd{qimport}---import a third-party patch into the queue}
1098 The \hgcmd{qimport} command adds an entry for an external patch to the
1099 \sfilename{series} file, and copies the patch into the
1100 \sdirname{.hg/patches} directory. It adds the entry immediately after
1101 the topmost applied patch, but does not push the patch.
1103 If the \sdirname{.hg/patches} directory is a repository,
1104 \hgcmd{qimport} automatically does an \hgcmd{add} of the imported
1105 patch.
1107 \subsection{\hgcmd{qinit}---prepare a repository to work with MQ}
1109 The \hgcmd{qinit} command prepares a repository to work with MQ. It
1110 creates a directory called \sdirname{.hg/patches}.
1112 Options:
1113 \begin{itemize}
1114 \item[\hgopt{qinit}{-c}] Create \sdirname{.hg/patches} as a repository
1115 in its own right. Also creates a \sfilename{.hgignore} file that
1116 will ignore the \sfilename{status} file.
1117 \end{itemize}
1119 When the \sdirname{.hg/patches} directory is a repository, the
1120 \hgcmd{qimport} and \hgcmd{qnew} commands automatically \hgcmd{add}
1121 new patches.
1123 \subsection{\hgcmd{qnew}---create a new patch}
1125 The \hgcmd{qnew} command creates a new patch. It takes one mandatory
1126 argument, the name to use for the patch file. The newly created patch
1127 is created empty by default. It is added to the \sfilename{series}
1128 file after the current topmost applied patch, and is immediately
1129 pushed on top of that patch.
1131 If \hgcmd{qnew} finds modified files in the working directory, it will
1132 refuse to create a new patch unless the \hgopt{qnew}{-f} option is
1133 used (see below). This behaviour allows you to \hgcmd{qrefresh} your
1134 topmost applied patch before you apply a new patch on top of it.
1136 Options:
1137 \begin{itemize}
1138 \item[\hgopt{qnew}{-f}] Create a new patch if the contents of the
1139 working directory are modified. Any outstanding modifications are
1140 added to the newly created patch, so after this command completes,
1141 the working directory will no longer be modified.
1142 \item[\hgopt{qnew}{-m}] Use the given text as the commit message.
1143 This text will be stored at the beginning of the patch file, before
1144 the patch data.
1145 \end{itemize}
1147 \subsection{\hgcmd{qnext}---print the name of the next patch}
1149 The \hgcmd{qnext} command prints the name name of the next patch in
1150 the \sfilename{series} file after the topmost applied patch. This
1151 patch will become the topmost applied patch if you run \hgcmd{qpush}.
1153 \subsection{\hgcmd{qpop}---pop patches off the stack}
1155 The \hgcmd{qpop} command removes applied patches from the top of the
1156 stack of applied patches. By default, it removes only one patch.
1158 This command removes the changesets that represent the popped patches
1159 from the repository, and updates the working directory to undo the
1160 effects of the patches.
1162 This command takes an optional argument, which it uses as the name or
1163 index of the patch to pop to. If given a name, it will pop patches
1164 until the named patch is the topmost applied patch. If given a
1165 number, \hgcmd{qpop} treats the number as an index into the entries in
1166 the series file, counting from zero (empty lines and lines containing
1167 only comments do not count). It pops patches until the patch
1168 identified by the given index is the topmost applied patch.
1170 The \hgcmd{qpop} command does not read or write patches or the
1171 \sfilename{series} file. It is thus safe to \hgcmd{qpop} a patch that
1172 you have removed from the \sfilename{series} file, or a patch that you
1173 have renamed or deleted entirely. In the latter two cases, use the
1174 name of the patch as it was when you applied it.
1176 By default, the \hgcmd{qpop} command will not pop any patches if the
1177 working directory has been modified. You can override this behaviour
1178 using the \hgopt{qpop}{-f} option, which reverts all modifications in
1179 the working directory.
1181 Options:
1182 \begin{itemize}
1183 \item[\hgopt{qpop}{-a}] Pop all applied patches. This returns the
1184 repository to its state before you applied any patches.
1185 \item[\hgopt{qpop}{-f}] Forcibly revert any modifications to the
1186 working directory when popping.
1187 \item[\hgopt{qpop}{-n}] Pop a patch from the named queue.
1188 \end{itemize}
1190 The \hgcmd{qpop} command removes one line from the end of the
1191 \sfilename{status} file for each patch that it pops.
1193 \subsection{\hgcmd{qprev}---print the name of the previous patch}
1195 The \hgcmd{qprev} command prints the name of the patch in the
1196 \sfilename{series} file that comes before the topmost applied patch.
1197 This will become the topmost applied patch if you run \hgcmd{qpop}.
1199 \subsection{\hgcmd{qpush}---push patches onto the stack}
1200 \label{sec:mq:cmd:qpush}
1202 The \hgcmd{qpush} command adds patches onto the applied stack. By
1203 default, it adds only one patch.
1205 This command creates a new changeset to represent each applied patch,
1206 and updates the working directory to apply the effects of the patches.
1208 The default data used when creating a changeset are as follows:
1209 \begin{itemize}
1210 \item The commit date and time zone are the current date and time
1211 zone. Because these data are used to compute the identity of a
1212 changeset, this means that if you \hgcmd{qpop} a patch and
1213 \hgcmd{qpush} it again, the changeset that you push will have a
1214 different identity than the changeset you popped.
1215 \item The author is the same as the default used by the \hgcmd{commit}
1216 command.
1217 \item The commit message is any text from the patch file that comes
1218 before the first diff header. If there is no such text, a default
1219 commit message is used that identifies the name of the patch.
1220 \end{itemize}
1221 If a patch contains a Mercurial patch header (XXX add link), the
1222 information in the patch header overrides these defaults.
1224 Options:
1225 \begin{itemize}
1226 \item[\hgopt{qpush}{-a}] Push all unapplied patches from the
1227 \sfilename{series} file until there are none left to push.
1228 \item[\hgopt{qpush}{-l}] Add the name of the patch to the end
1229 of the commit message.
1230 \item[\hgopt{qpush}{-m}] If a patch fails to apply cleanly, use the
1231 entry for the patch in another saved queue to compute the parameters
1232 for a three-way merge, and perform a three-way merge using the
1233 normal Mercurial merge machinery. Use the resolution of the merge
1234 as the new patch content.
1235 \item[\hgopt{qpush}{-n}] Use the named queue if merging while pushing.
1236 \end{itemize}
1238 The \hgcmd{qpush} command reads, but does not modify, the
1239 \sfilename{series} file. It appends one line to the \hgcmd{status}
1240 file for each patch that it pushes.
1242 \subsection{\hgcmd{qrefresh}---update the topmost applied patch}
1244 The \hgcmd{qrefresh} command updates the topmost applied patch. It
1245 modifies the patch, removes the old changeset that represented the
1246 patch, and creates a new changeset to represent the modified patch.
1248 The \hgcmd{qrefresh} command looks for the following modifications:
1249 \begin{itemize}
1250 \item Changes to the commit message, i.e.~the text before the first
1251 diff header in the patch file, are reflected in the new changeset
1252 that represents the patch.
1253 \item Modifications to tracked files in the working directory are
1254 added to the patch.
1255 \item Changes to the files tracked using \hgcmd{add}, \hgcmd{copy},
1256 \hgcmd{remove}, or \hgcmd{rename}. Added files and copy and rename
1257 destinations are added to the patch, while removed files and rename
1258 sources are removed.
1259 \end{itemize}
1261 Even if \hgcmd{qrefresh} detects no changes, it still recreates the
1262 changeset that represents the patch. This causes the identity of the
1263 changeset to differ from the previous changeset that identified the
1264 patch.
1266 Options:
1267 \begin{itemize}
1268 \item[\hgopt{qrefresh}{-e}] Modify the commit and patch description,
1269 using the preferred text editor.
1270 \item[\hgopt{qrefresh}{-m}] Modify the commit message and patch
1271 description, using the given text.
1272 \item[\hgopt{qrefresh}{-l}] Modify the commit message and patch
1273 description, using text from the given file.
1274 \end{itemize}
1276 \subsection{\hgcmd{qrename}---rename a patch}
1278 The \hgcmd{qrename} command renames a patch, and changes the entry for
1279 the patch in the \sfilename{series} file.
1281 With a single argument, \hgcmd{qrename} renames the topmost applied
1282 patch. With two arguments, it renames its first argument to its
1283 second.
1285 \subsection{\hgcmd{qrestore}---restore saved queue state}
1287 XXX No idea what this does.
1289 \subsection{\hgcmd{qsave}---save current queue state}
1291 XXX Likewise.
1293 \subsection{\hgcmd{qseries}---print the entire patch series}
1295 The \hgcmd{qseries} command prints the entire patch series from the
1296 \sfilename{series} file. It prints only patch names, not empty lines
1297 or comments. It prints in order from first to be applied to last.
1299 \subsection{\hgcmd{qtop}---print the name of the current patch}
1301 The \hgcmd{qtop} prints the name of the topmost currently applied
1302 patch.
1304 \subsection{\hgcmd{qunapplied}---print patches not yet applied}
1306 The \hgcmd{qunapplied} command prints the names of patches from the
1307 \sfilename{series} file that are not yet applied. It prints them in
1308 order from the next patch that will be pushed to the last.
1310 \subsection{\hgcmd{qversion}}
1312 The \hgcmd{qversion} command prints the version of MQ that is in use.
1314 \subsection{\hgcmd{strip}---remove a revision and descendants}
1316 The \hgcmd{strip} command removes a revision, and all of its
1317 descendants, from the repository. It undoes the effects of the
1318 removed revisions from the repository, and updates the working
1319 directory to the first parent of the removed revision.
1321 The \hgcmd{strip} command saves a backup of the removed changesets in
1322 a bundle, so that they can be reapplied if removed in error.
1324 Options:
1325 \begin{itemize}
1326 \item[\hgopt{strip}{-b}] Save unrelated changesets that are intermixed
1327 with the stripped changesets in the backup bundle.
1328 \item[\hgopt{strip}{-f}] If a branch has multiple heads, remove all
1329 heads. XXX This should be renamed, and use \texttt{-f} to strip revs
1330 when there are pending changes.
1331 \item[\hgopt{strip}{-n}] Do not save a backup bundle.
1332 \end{itemize}
1334 \section{MQ file reference}
1336 \subsection{The \sfilename{series} file}
1338 The \sfilename{series} file contains a list of the names of all
1339 patches that MQ can apply. It is represented as a list of names, with
1340 one name saved per line. Leading and trailing white space in each
1341 line are ignored.
1343 Lines may contain comments. A comment begins with the ``\texttt{\#}''
1344 character, and extends to the end of the line. Empty lines, and lines
1345 that contain only comments, are ignored.
1347 You will often need to edit the \sfilename{series} file by hand, hence
1348 the support for comments and empty lines noted above. For example,
1349 you can comment out a patch temporarily, and \hgcmd{qpush} will skip
1350 over that patch when applying patches. You can also change the order
1351 in which patches are applied by reordering their entries in the
1352 \sfilename{series} file.
1354 Placing the \sfilename{series} file under revision control is also
1355 supported; it is a good idea to place all of the patches that it
1356 refers to under revision control, as well. If you create a patch
1357 directory using the \hgopt{qinit}{-c} option to \hgcmd{qinit}, this
1358 will be done for you automatically.
1360 \subsection{The \sfilename{status} file}
1362 The \sfilename{status} file contains the names and changeset hashes of
1363 all patches that MQ currently has applied. Unlike the
1364 \sfilename{series} file, this file is not intended for editing. You
1365 should not place this file under revision control, or modify it in any
1366 way. It is used by MQ strictly for internal book-keeping.
1368 %%% Local Variables:
1369 %%% mode: latex
1370 %%% TeX-master: "00book"
1371 %%% End: